By Tony Huang | 30 November 2023 | 0 Comments
Passive Components - Low PIM, Low VSWR, High Frequency, Custom Design
Passive Components
Filter on attribute below:
Low PIM and Non Low PIM Passive Components
Frequency Ranges:
There are several Frequency ranges for different application and Passive type:
For Termination Load and Attenuator, there are DC - 3 GHz / 4 GHz / 6 GHz for most of the connector interface, Type N, TNC, SMA Termination Load can up to 18 GHz, 3.5 mm Termination Load 26.5 GHz, 2.92 mm Termination Load 40 GHz, and 2.4 mm Termination Load 50 GHz.
For Cavity Coupler, we will design the frequency band based on the application, 350 - 470 MHz, 350 - 960 MHz, 350 - 1850 MHz, 350 - 2700 MHz, 698 - 2700 MHz, 698 - 3800 MHz, 700 - 3700 MHz type are available.
For Cavity Power Divider, there are 88 - 108 MHz, 350 - 2700 MHz, 350 - 3800 MHz, 698 - 2700 MHz, 698 - 3800 MHz, 700 - 3700 MHz, 2.4 - 5.8 GHz available for different project.
Microstrip Coupler have 80 - 470 MHz, 400 - 6000 MHz, while Microstrip Power Divider have 80 - 470 MHz, 350 - 520 MHz, 350 - 880 MHz, 698 - 2700 MHz, 698 - 3800 MHz, 1100 - 1700 MHz, 1550 - 1660 MHz, 2000 - 6000 MHz.
Hybrid Coupler also have many frequency ranges: 350 - 1560 MHz, 400 - 470 MHz, 410 - 430 MHz, 700 - 2700 MHz, 700 - 3700 MHz, 700 - 3800 MHz, 800 - 2700 MHz, 1785 - 1805 MHz, 2000 - 6000 MHz.
Lightning Arrester normally go with N Male or N Female, and Frequency ranges with DC - 2.2 GHz, DC - 3 GHz, DC - 4 GHz, and DC - 6 GHz.
Antenna Frequency normally lower than 6 GHz, and with popular 380 - 2700 MHz, 698 - 2700 MHz, 2.4 GHz.
Connector Type:
N type, 4.3-10, and 7/16 DIN are the most popular types for the Passive Components. RF Termination is used to terminate the RF product, and Attenuator is used to reduce the signal strength, so it will go with all the connector interface: 1.0/2.3, SMA, SMB, SMC, SMP, BNC, MCX, MMCX, MMBX, TNC, Type N, 2.4 mm, 2.92 mm, 3.5 mm, RNX10, 2.2-5, 4.3-10, 7/16 DIN.
Filter on attribute below:
| Termination Load |
| Attenuator |
| Cavity Coupler |
| Cavity Power Divider |
| Microstrip Coupler |
| Microstrip Power Divider |
| Hybrid Coupler |
| Lightning Arrester |
| Antenna |
Low PIM and Non Low PIM Passive Components
Frequency Ranges:
There are several Frequency ranges for different application and Passive type:
For Termination Load and Attenuator, there are DC - 3 GHz / 4 GHz / 6 GHz for most of the connector interface, Type N, TNC, SMA Termination Load can up to 18 GHz, 3.5 mm Termination Load 26.5 GHz, 2.92 mm Termination Load 40 GHz, and 2.4 mm Termination Load 50 GHz.
For Cavity Coupler, we will design the frequency band based on the application, 350 - 470 MHz, 350 - 960 MHz, 350 - 1850 MHz, 350 - 2700 MHz, 698 - 2700 MHz, 698 - 3800 MHz, 700 - 3700 MHz type are available.
For Cavity Power Divider, there are 88 - 108 MHz, 350 - 2700 MHz, 350 - 3800 MHz, 698 - 2700 MHz, 698 - 3800 MHz, 700 - 3700 MHz, 2.4 - 5.8 GHz available for different project.
Microstrip Coupler have 80 - 470 MHz, 400 - 6000 MHz, while Microstrip Power Divider have 80 - 470 MHz, 350 - 520 MHz, 350 - 880 MHz, 698 - 2700 MHz, 698 - 3800 MHz, 1100 - 1700 MHz, 1550 - 1660 MHz, 2000 - 6000 MHz.
Hybrid Coupler also have many frequency ranges: 350 - 1560 MHz, 400 - 470 MHz, 410 - 430 MHz, 700 - 2700 MHz, 700 - 3700 MHz, 700 - 3800 MHz, 800 - 2700 MHz, 1785 - 1805 MHz, 2000 - 6000 MHz.
Lightning Arrester normally go with N Male or N Female, and Frequency ranges with DC - 2.2 GHz, DC - 3 GHz, DC - 4 GHz, and DC - 6 GHz.
Antenna Frequency normally lower than 6 GHz, and with popular 380 - 2700 MHz, 698 - 2700 MHz, 2.4 GHz.
Connector Type:
N type, 4.3-10, and 7/16 DIN are the most popular types for the Passive Components. RF Termination is used to terminate the RF product, and Attenuator is used to reduce the signal strength, so it will go with all the connector interface: 1.0/2.3, SMA, SMB, SMC, SMP, BNC, MCX, MMCX, MMBX, TNC, Type N, 2.4 mm, 2.92 mm, 3.5 mm, RNX10, 2.2-5, 4.3-10, 7/16 DIN.
Leave a Reply
Your email address will not be published.Required fields are marked. *